Garnet Abrasive
Mohs Hardness: 6.5-7
Bulk Density: 140 lbs cuft
- Used in Sandblast and Waterjet
- Relatively Hard Mined Mineral
- Heavy Abrasive Requires Higher Pressures to be effective
- Less than 10% Mined in the USA
Garnet Abrasive
01Oct
Related Posts
01Oct
Steel Shot and Steel Grit Sandblast Abrasive
Mohs Hardness: 8 Bulk Density: 250-300 lbs cuft Used for Air and Wheel Blast Applications and Shot Peening High recyclability Due to Weight/Density, requires increase air/pressure compared to lighter abrasives…
14Oct
Long Venturi Nozzle
The long venturi nozzle offers a 40% increase in production over a straight bore nozzle. Made with a protective polyurethane jacket, these nozzles are obviously built for physically demanding operations.
14Oct
Operator Review of Farrow Flow® Insert for Abrasive Blasting
Return Operator Review of Farrow Flow® Insert for Abrasive Blasting If someone told you they could install a product on my sandblast equipment in minutes, and it would both improve
01Oct
Coal Slag Abrasive
Mohs Hardness: 7 Bulk Density: 110 lbs cuft Low Cost Abrasive 100% Recycled Byproduct Tests show to breakdown slowe/create less dust than Garnet Fast Cutting of Coatings and Rust
20Jul
Abrasive Blast System Sizing Guide
Abrasive Blast System Sizing Guide With Blue Dog Blasting on your team, you have access to the sandblasting expertise that only comes with decades of sandblasting experience. The table below
01Oct
Corn Cob
Mohs Hardness: 4 Bulk Density: 45 lbs cuft Used for Blast and Log Home Restoration Other Finishing Processes: Vibratory Polishing, Deburring, Deflashing and Parts Drying Can be used in Mobile…