Garnet Abrasive
Mohs Hardness: 6.5-7
Bulk Density: 140 lbs cuft
- Used in Sandblast and Waterjet
- Relatively Hard Mined Mineral
- Heavy Abrasive Requires Higher Pressures to be effective
- Less than 10% Mined in the USA
Garnet Abrasive
01Oct
Related Posts
01Oct
Steel Shot and Steel Grit Sandblast Abrasive
Mohs Hardness: 8 Bulk Density: 250-300 lbs cuft Used for Air and Wheel Blast Applications and Shot Peening High recyclability Due to Weight/Density, requires increase air/pressure compared to lighter abrasives…
14Oct
Nozzle Comparison with Rust Removal
This test features the XL Performance Nozzle, Double Venturi Nozzle and the Long Venturi Nozzle. Each is being fed 90 PSI with an Empire 650 XL Sandblast Pot.
01Oct
White Aluminum Oxide Sandblast Abrasive
Mohs Hardness: 8-9 Bulk Density: 125 lbs cuft White fused aluminum oxide is a very high purity oxide Used when contamination is an issue to be considered Very hard /…
15Oct
Double Venturi Nozzle
The tungsten carbide double venturi nozzle offers a 35% larger blast pattern than a standard long venturi. This is accomplished with only a slight loss in abrasive velocity. These nozzles…
01Oct
Corn Cob
Mohs Hardness: 4 Bulk Density: 45 lbs cuft Used for Blast and Log Home Restoration Other Finishing Processes: Vibratory Polishing, Deburring, Deflashing and Parts Drying Can be used in Mobile…
24Jun
How Much Air Do You Need For Your Abrasive Blast Process?
Return How Much Air Do You Need For Your Abrasive Blast Process? Abrasive Blast Process Air Consumption FAQs When it comes to air consumption for your abrasive blast process, how