Related Posts
Operator Review of Farrow FlowĀ® Insert for Abrasive Blasting
Return Operator Review of Farrow FlowĀ® Insert for Abrasive Blasting If someone told you they could install a product on my sandblast equipment in minutes, and it would both improve
Nozzle Comparison with Rust Removal
This test features the XL Performance Nozzle, Double Venturi Nozzle and the Long Venturi Nozzle. Each is being fed 90 PSI with an Empire 650 XL Sandblast Pot.
ZirGrit AZ Sandblast Abrasive
Mohs Hardness: 8-8.5 Bulk Density: 145-150 lbs cuft Highest recyclability of all non-metallic abrasives Reuse 5-6X more than Aluminum Oxide - Reduced Abrasive Consumption Very Fast Cutting Very Low Dust…
Steel Shot and Steel Grit Sandblast Abrasive
Mohs Hardness: 8 Bulk Density: 250-300 lbs cuft Used for Air and Wheel Blast Applications and Shot Peening High recyclability Due to Weight/Density, requires increase air/pressure compared to lighter abrasives…
Sure Cut Sandblast Abrasives (Velocity & Edge)
Consumption rate reductions of up to 30-percent vs Coal Slag Faster cutting rates producing up to 50-percent less time on the job vs Coal Slag Reduction in cost per square…
Brown Aluminum Oxide
Mohs Hardness: 8-9 Bulk Density: 110 lbs cuft Hard and long lasting abrasives Typically used in blast cabinet and rooms because of recyclability Used in Vibratory Media as a cutting…