ZirGrit AZ Sandblast Abrasive

Mohs Hardness: 5.5-6.6
Bulk Density: 100 lbs cuft

• Made of 100% Recycled Glass 
• Safe For Use Around Water
• American Made 
• Contains less than 1% free silica 
• Non-reactive & inert
• Beryllium is not listed on SDS
• CARB Approved / QPL Approved / Mil-Spec, SSPC AB-1, MIL-A-22262B(SH)

Mohs Hardness: 7
Bulk Density: 160 lbs cuft

• Hard, Heavy good etching abrasive
• Breaks down in small angular pieces 
• Wear on nozzles and hoses
• Angular Shaped / Dark Grey or Black color

Mohs Hardness: 3-4.5
Bulk Density: 55 lbs cuft

• 100% Recycled Material 
• Good for coating removal without damaging the substrate 
• Military used Plastic Abrasive to replace toxic chemical stripping 
• Blast Cleaning, Deflashing and Deburring product
• Good abrasive to deburr machined aluminum parts
• Used in Mobile applications along with Blast Cabinets and Blast Rooms

Mohs Hardness: 6-6.5
Bulk Density: 130 lbs cuft

• Mined Staurolite Sands 
• Round and Subangular Shaped Media
• Coating and Rust Removal
• Tests have show it to breakdown faster and produce more dust than Garnet, Crushed Glass and Coal Slag 
• Starblast™ guaranteed to contain <3% free silica, typically <2%

Mohs Hardness: 7-8
Bulk Density: 90-105 lbs cuft

• Made of Spherical, Angular, Sub-Angular and Oval Shaped Abrasives
• Significantly Delays Flash Rust 
• Good replacement of Garnet - Cuts Faster (at all pressures tested) and Uses Less Abrasive to complete same job
• Beryllium and Free Silica Not Listed on SDS (not detected)

Mohs Hardness: 8-9
Bulk Density: 110 lbs cuft

• Hard and long lasting abrasives 
• Typically used in blast cabinet and rooms because of recyclability
• Used in Vibratory Media as a cutting agent 
• Aluminum oxide used as a grinding and polishing media
• Very hard and sharp abrasive

Mohs Hardness: 8
Bulk Density: 250-300 lbs cuft

• Used for Air and Wheel Blast Applications and Shot Peening
• High recyclability 
• Due to Weight/Density, requires increase air/pressure compared to lighter abrasives 
• Shot - Spherical: Used for peening, cleaning and smoothing 
• Grit - Angular:  Cleaning and Profile
• Very low dust compared to other abrasive (non-metallic abrasives)

Mohs Hardness: 7
Bulk Density: 95-100 lbs cuft

• Stronger and More Angular
• Narrow distribution 
• 3-5X Less Breakdown to Garnet 
• Decreased disposal / High recyclability 
• 0% Free Silica 
• Made in the USA 
• One of the fastest test coating and rust removal

Mohs Hardness: 2.5
Bulk Density: 60 lbs cuft

• Sodium Bicarbonate Abrasive
• Non-Destructive Blast Abrasive 
• Soda can be used in Mobile applications and with Cabinets and Blast Rooms
• Good restoration and mold remediation abrasive 
• Water soluble 
• One-Pass Media - No reuse

Mohs Hardness: 7
Bulk Density: 80 lbs cuft

• Synthetic Olivine Sands
• Significantly Delays Flash Rust 
• Non-Toxic - Hold NO Heavy Metals
• Strong Breakage Resistance
• Contain less than 1 % of free silica
• Can be recycled and re-used 3-4 times
• Not listed as Dangerous Waste