Sandblaster Metering Valve – Corsa II Abrasive Metering Valve’s are the equivalent of the Schmidt “Thompson Valve.” The Corsa II Abrasive metering valve is a normally closed abrasive metering valve that requires a pilot air signal to permit abrasive flow. This sandblaster Metering valve can be used on pressure hold blast pots, multiple outlet blast pots, and pressure release blast pots to prevent unwanted filling of the blast hose. These have NPT threads for good, tight connections.
We offer the Corsa 2 in two variations; With a Polyurethane sleeve and a Tungsten Carbide sleeve. Both have 1-1/4″ abrasive feed ports (where you screw it onto the pot), and 1-1/4″ NPT male threads on both sides of the pipe nipple.
Corsa II Abrasive Metering Valve
Tungsten Carbide features:
Blue Dog Sku:30-201
- Quick valve actuation
- Anti-vibration Washer
- Exhaust filter prevents dust from entering air chamber
- Tungsten Carbide Plunger and Sleeve
- Hardened connecting nipple
- Piston Travel Stop Nut
- Improved plunger seat and piston design.
- Stainless Steel Internal Parts
- 1″ Clean Out Drain/Port
- Graduation Markings or Abrasive Adjustment Indicator
- Requires 90 psi signal line pressure for full operation.
30-202 Urethane features:
- Quick valve actuation
- Anti-vibration Washer
- Exhaust filter prevents dust from entering air chamber
- Tungsten Carbide Plunger
- Urethane Sleeve
- Hardened connecting nipple
- Piston Travel Stop Nut
- Improved Plunger Seat and Piston Design
- Stainless Steel Internal Parts
- 1″ Clean Out Drain/Port
- Graduation Markings or Abrasive Adjustment Indicator
- Requires 90 psi signal line pressure for full operation.
OEM Equivalent:
- Schmidt 2152-007 (tungsten)
- Axxiom 2152-007
- IDS 888-2148-007PB
- U.S. Filter 2152-007
Repair Kits:
For the 30-201 Tungsten Carbide Sleeve, you need repair kit 30-203
For the 30-202 Urethane Sleeve, you need repair kit 30-204
