Garnet Abrasive
Mohs Hardness: 6.5-7
Bulk Density: 140 lbs cuft
- Used in Sandblast and Waterjet
- Relatively Hard Mined Mineral
- Heavy Abrasive Requires Higher Pressures to be effective
- Less than 10% Mined in the USA
Garnet Abrasive
01Oct
Related Posts
14Oct
Operator Review of Farrow Flow® Insert for Abrasive Blasting
Return Operator Review of Farrow Flow® Insert for Abrasive Blasting If someone told you they could install a product on my sandblast equipment in minutes, and it would both improve
01Oct
ZirGrit AZ Sandblast Abrasive
Mohs Hardness: 8-8.5 Bulk Density: 145-150 lbs cuft Highest recyclability of all non-metallic abrasives Reuse 5-6X more than Aluminum Oxide - Reduced Abrasive Consumption Very Fast Cutting Very Low Dust…
01Oct
Crushed Glass
Mohs Hardness: 5.5-6.6 Bulk Density: 100 lbs cuft Made of 100% Recycled Glass Safe For Use Around Water American Made Contains less than 1% free silica Non-reactive & inert Beryllium…
04Mar
Comprehensive Guide to Slurry vs. Wet Blasting
When it comes to optimizing sandblasting techniques, wet blasting stands out as a preferred method across various industries. Also known as dustless blasting, mist blasting, or slurry blasting, this innovative…
01Oct
Silcion Carbide
Mohs Hardness: 9 Bulk Density: 95 lbs cuft Hardest of Non-Metallic Abrasives Fast Cutting of Coatings Silicon carbide is a ceramic material with an excellent hardness Hard brittle grains shatter…
15Oct
Double Venturi Nozzle
The tungsten carbide double venturi nozzle offers a 35% larger blast pattern than a standard long venturi. This is accomplished with only a slight loss in abrasive velocity. These nozzles…