Double Venturi Nozzle

Double Venturi video screenshot

The tungsten carbide double venturi nozzle offers a 35% larger blast pattern than a standard long venturi. This is accomplished with only a slight loss in abrasive velocity. These nozzles are designed to be used on jobs where medium cutting action is required. They offer a more even dispersion of abrasive throughout the larger blast pattern. Excellent for plastic or agricultural abrasives. Also great when anodizing or powder coating.

Long Venturi Nozzle

Long Venturi Nozzle video screenshot

The long venturi nozzle offers a 40% increase in production over a straight bore nozzle. Made with a protective polyurethane jacket, these nozzles are obviously built for physically demanding operations.

SiALON XL Long Venturi Nozzle – Rust Removal

XL Nozzle You Tube Screenshot

This high-performance SiAION XL nozzle with Aluminum Jacket is made of a lightweight SiAION material that offers service life and durability similar to tungsten carbide at only half the weight. In other words, SiAlON is perfect for long jobs.

Nozzle Comparison with Rust Removal

Sunblast Nozzle Comparison Trial You Tube Screenshot

This test features the XL Performance Nozzle, Double Venturi Nozzle and the Long Venturi Nozzle. Each is being fed 90 PSI with an Empire 650 XL Sandblast Pot.

10X Engineered Materials

10X Abrasive You Tube Screenshot

Mohs Hardness: 7-8
Bulk Density: 90-105 lbs cuft

Made of Spherical, Angular, Sub-Angular and Oval Shaped Abrasives
Significantly Delays Flash Rust
Good replacement of Garnet – Cuts Faster (at all pressures tested) and Uses Less Abrasive to complete same job
Beryllium and Free Silica Not Listed on SDS (not detected)

Brown Aluminum Oxide

Aluminum Oxide You Tube Screenshot

Mohs Hardness: 8-9
Bulk Density: 110 lbs cuft

Hard and long lasting abrasives
Typically used in blast cabinet and rooms because of recyclability
Used in Vibratory Media as a cutting agent
Aluminum oxide used as a grinding and polishing media
Very hard and sharp abrasive

Crushed Glass

Crushed Glass You Tube Screenshot

Mohs Hardness: 5.5-6.6
Bulk Density: 100 lbs cuft

Made of 100% Recycled Glass
Safe For Use Around Water
American Made
Contains less than 1% free silica
Non-reactive & inert
Beryllium is not listed on SDS
CARB Approved / QPL Approved / Mil-Spec, SSPC AB-1, MIL-A-22262B(SH)

Garnet Abrasive

Garnet Abrasive You Tube Screenshot

Mohs Hardness: 6.5-7
Bulk Density: 140 lbs cuft

Used in Sandblast and Waterjet
Relatively Hard Mined Mineral
Heavy Abrasive Requires Higher Pressures to be effective
Less than 10% Mined in the USA

Iron Grit Abrasive

Iron Grit Abrasive You Tube Screenshot

Mohs Hardness: 7
Bulk Density: 160 lbs cuft

Hard, Heavy good etching abrasive
Breaks down in small angular pieces
Wear on nozzles and hoses
Angular Shaped / Dark Grey or Black color

Plastic Sandblast Abrasive

Plastic Sandblast Abrasive You Tube Screenshot

Mohs Hardness: 3-4.5
Bulk Density: 55 lbs cuft

100% Recycled Material
Good for coating removal without damaging the substrate
Military used Plastic Abrasive to replace toxic chemical stripping
Blast Cleaning, Deflashing and Deburring product
Good abrasive to deburr machined aluminum parts
Used in Mobile applications along with Blast Cabinets and Blast Rooms