Hiflo 1″ Remote Deadman Exhaust Valve Repair Kit – Clemco 01928 Equivalent
The exhaust valve is what lets your blast pot depressurize the moment the operator releases the deadman handle. When its rubber seat and seal wear out, the pot leaks air while blasting, loses pressure, or blows down slowly — a production problem and a safety problem. This Blue Dog repair kit replaces the worn rubber parts in a 1″ remote control exhaust valve so it seals and cycles like new. It is the equivalent of Clemco 01928, IDS 101-9280 and A-BEC 350-0403 service kits, at well under the price of the OEM kit.
What’s in the Kit
| Part | Job it does |
|---|---|
| Rubber Seat | Seals the exhaust port while the pot is pressurized |
| Rubber Seal | Keeps air from bypassing the valve plug |
| Rubber Seal Cover | Protects the seal from abrasive and wear |
OEM Cross-Reference
| Manufacturer | Part Number |
|---|---|
| Clemco | 01928 |
| IDS | 101-9280 |
| A-BEC | 350-0403 |
| Blue Dog | 30-702 |
Signs Your Exhaust Valve Needs a Rebuild
- Air hissing from the exhaust or muffler while blasting
- Pot won’t reach full pressure, or nozzle pressure drops
- Slow or incomplete blowdown when the deadman is released
- Abrasive or grit blowing out of the exhaust port
How to Rebuild a 1″ Exhaust Valve
- Shut off the air supply and fully depressurize the blast pot.
- Disconnect the control line and remove the exhaust valve cap.
- Remove the old seat, seal and seal cover; clean the valve body of abrasive.
- Install the new parts from this kit and reassemble.
- Re-pressurize and cycle the deadman several times to check for leaks.
Always follow your blast machine manufacturer’s manual and safety procedures.
Why Buy From Blue Dog Blasting
- Priced well below OEM kits that list for $55–$58
- Every part pictured is included — everything you need to bring this valve back to life
- Pair it with our Hiflo 1 inch Exhaust Valve if the valve body itself is cracked or worn
Frequently Asked Questions
Does this kit replace Clemco 01928?
Yes. It is the equivalent of Clemco 01928, IDS 101-9280 and A-BEC 350-0403.
What valve does this fit?
The Hiflo 1″ remote deadman exhaust valve and Clemco-style 1″ piston outlet valves used on remote-controlled blast pots.
How often should I rebuild my exhaust valve?
Rebuild it as soon as you notice air leaking from the exhaust while blasting or slow blowdown. Many shops keep a spare kit on hand to avoid downtime.
Should I rebuild or replace the valve?
Rebuild if the valve body is intact — this kit costs a small fraction of a new valve. Replace the valve if the body is cracked, pitted or worn through.
Is this kit in stock?
Yes, SKU 30-702 ships from Blue Dog Blasting.
Need some quality and affordable abrasive media? We have that also. Learn More
