Garnet Abrasive
Mohs Hardness: 6.5-7
Bulk Density: 140 lbs cuft
- Used in Sandblast and Waterjet
- Relatively Hard Mined Mineral
- Heavy Abrasive Requires Higher Pressures to be effective
- Less than 10% Mined in the USA
Garnet Abrasive
01Oct
Related Posts
09Jul
Couplings
Couplings With Blue Dog couplings, or connectors, you can ensure that the pressure flow is strong and stable throughout your abrasive blasting project. Coupling actually means the pairing of two
15Oct
Double Venturi Nozzle
The tungsten carbide double venturi nozzle offers a 35% larger blast pattern than a standard long venturi. This is accomplished with only a slight loss in abrasive velocity. These nozzles…
01Oct
Iron Grit Abrasive
Mohs Hardness: 7 Bulk Density: 160 lbs cuft Hard, Heavy good etching abrasive Breaks down in small angular pieces Wear on nozzles and hoses Angular Shaped / Dark Grey or…
01Oct
White Aluminum Oxide Sandblast Abrasive
Mohs Hardness: 8-9 Bulk Density: 125 lbs cuft White fused aluminum oxide is a very high purity oxide Used when contamination is an issue to be considered Very hard /…
22May
Types of Metering Valves
Return Types of Metering Valves Choosing the right metering valve can be tricky. Even just calling it a metering valve has it’s issues. Some people call them grit valves, or
01Oct
Sure Cut Sandblast Abrasives (Velocity & Edge)
Consumption rate reductions of up to 30-percent vs Coal Slag Faster cutting rates producing up to 50-percent less time on the job vs Coal Slag Reduction in cost per square…
