Coal Slag Abrasive
Mohs Hardness: 7
Bulk Density: 110 lbs cuft- Low Cost Abrasive
- 100% Recycled Byproduct
- Tests show to breakdown slowe/create less dust than Garnet
- Fast Cutting of Coatings and Rust
Coal Slag Abrasive
01Oct
Related Posts
14Oct
SiALON XL Long Venturi Nozzle – Rust Removal
This high-performance SiAION XL nozzle with Aluminum Jacket is made of a lightweight SiAION material that offers service life and durability similar to tungsten carbide at only half the weight.…
01Oct
White Aluminum Oxide Sandblast Abrasive
Mohs Hardness: 8-9 Bulk Density: 125 lbs cuft White fused aluminum oxide is a very high purity oxide Used when contamination is an issue to be considered Very hard /…
01Oct
Corn Cob
Mohs Hardness: 4 Bulk Density: 45 lbs cuft Used for Blast and Log Home Restoration Other Finishing Processes: Vibratory Polishing, Deburring, Deflashing and Parts Drying Can be used in Mobile…
01Oct
Spartan Sandblast Abrasive
Mohs Hardness: 7 Bulk Density: 95-100 lbs cuft Stronger and More Angular Narrow distribution 3-5X Less Breakdown to Garnet Decreased disposal / High recyclability 0% Free Silica Made in the…
15Oct
Double Venturi Nozzle
The tungsten carbide double venturi nozzle offers a 35% larger blast pattern than a standard long venturi. This is accomplished with only a slight loss in abrasive velocity. These nozzles…
14Oct
Nozzle Comparison with Rust Removal
This test features the XL Performance Nozzle, Double Venturi Nozzle and the Long Venturi Nozzle. Each is being fed 90 PSI with an Empire 650 XL Sandblast Pot.