AirStop II Deadman Control Handle – Schmidt 2263-001 Replacement
The deadman handle is the operator’s on/off switch at the nozzle. Pressing it completes the air circuit through the twin line and signals the pot’s remote control valve to start blasting. Letting go breaks the circuit and stops the blast — the most important safety device on a blast pot. This AirStop II handle is a direct replacement for the Schmidt 2263-001 Deadman II and works with Schmidt, Empire, Graco and other non-bleed systems.
Bleeder vs. Non-Bleeder: Order the Right Handle
This is a non-bleeder handle. Non-bleeder handles are built for pressure-hold remote systems such as the Schmidt combo valve. Bleeder-style handles are a different design used on Clemco-style bleeder systems and should not be used with combo or Thompson valves. If your system uses a bleeder handle, this is not the right part.
OEM Cross-Reference
| Manufacturer | Part Number |
|---|---|
| Schmidt / Axxiom | 2263-001 (Deadman II) |
| Empire | 290166 |
| IDS | 290-166 |
| Graco | 17D788 |
| Blue Dog | 50-106 |
Specifications
| Spec | Value |
|---|---|
| Type | Pneumatic, non-bleeder |
| Twin line ports | 1/8″ and 1/4″ |
| Shipping weight | 3 lb |
Installation Tips
- Strap the handle to the blast hose just behind the nozzle holder.
- Connect both twin line hoses to the 1/8″ and 1/4″ ports.
- Test with the pot pressurized: press to start, release to confirm the blast stops immediately.
We recommend replacing worn twin line at the same time — leaks in old hose slow the handle’s response.
Keep It Running
- AirStop II Deadman Repair Kit — rebuild a worn handle instead of replacing it
- Twin Line Hose 3/16″ with Schmidt/Empire hose ends
- AirStop IV Deadman Control Handle — alternative style
Frequently Asked Questions
Does this replace the Schmidt 2263-001 Deadman II?
Yes. It is a direct replacement for the Schmidt 2263-001 pneumatic Deadman II handle.
Is this a bleeder or non-bleeder deadman?
Non-bleeder. Use it with combo valve and other non-bleed remote systems, not with bleeder-style systems.
What size twin line does it use?
It has 1/8″ and 1/4″ ports for standard twin line hose.
Can I rebuild it?
Yes. A repair kit is sold separately, so a worn handle can be rebuilt instead of replaced.
Is it in stock?
Yes, SKU 50-106 ships from Blue Dog Blasting.
Need some quality and affordable abrasive media? We have that also. Learn More















